Cannot enter a modded vehicle

[xyzabcdeee]

Alright, so I'm new here. Been playing San Andreas for a while now, and I've been modding a lot of the cars lately.

The problem that I'm encountering now is very stressful though.

I have modded a few cars: ZR 350 = Nissan GTR 32| Cheetah = Nissan Silvia S15| Elegy = Nissan GTR 34

Now my problem is, I made them into drift cars. When I changed their handling in the Handling.cfg file and started up the game, spawn the car (or look for it), I can't enter the vehicle. CJ just walks and walks to the door of the car (pushing the car) but never opens the door.

These are the handling (drift) lines that I have used on each: ZR 350: 1920.0 4800.0 1.8 0.0 0.2 -0.15 75 0.65 0.75 0.55 5 300.0 39.0 10.0 4 P 5.5 0.75 1 36.0 1.0 0.08 0.01 0.25 -0.1 0.5 0.3 0.04 0.30 35000 c0002004 204400 0 0 1

Cheetah: 1200.0 2998.3 2.0 0.0 0.1 -0.8 75 0.70 0.80 0.47 5 350.0 50.0 5.0 R P 8.0 0.45 0 55.0 1.4 0.15 0.0 0.28 -0.05 0.5 0.3 0.25 0.10 35000 00110000 00c24007 0 2 0

Elegy: 1920.0 4800.0 1.8 0.0 0.2 -0.15 75 0.65 0.75 0.55 5 270.0 28.0 10.0 R P 5.5 0.75 1 36.0 1.0 0.08 0.01 0.25 -0.1 0.5 0.3 0.04 0.30 35000 c0002004 204400 0 0 1

If anyone can help me with this problem, then thank you for your help.

So once again, the problem I have is that when I changed their handling files (lines), I CANNOT ENTER THE MODDED VEHICLE WITH THEIR HANDLING LINES CHANGED

But I could enter the vehicle using their default handling lines

Please help me with this, I want them to drift =(

Or supply me with some drifting lines.

Thank You

Edited September 9, 2010 by xyzabcdeee