stilts Posted January 31, 2007 Share Posted January 31, 2007 Hey, i tried to install one carmod into the gta3.img file with imgtool. I am trying to install the Pontiac Trans Am on my San Andreas game. I replaced the banshee.txd file and dff file like the readme told me to do. It told me to cut and paste all of that stuff to vehicles.id,handling, and carcols. One problem i think that it locks up is because on there is told me to cut and paste this line which was "119, banshee, banshee, car, BANSHEE, BANSHEE, executive, 10, 7, 0, 089, 0.75" when the vehicles.ide file car numbers start with 400. so i just replaced the one that was already banshee on the list because i did not know what to do and i read your tutorial and it did not helpme out on that part . and the handling and all that was no help either. . Neither was the carcols. One question that im gonna ask is would it be alrite to just repalce the vehicles txd'sand dff files and leave the rest alone? Because the rest is so much trouble and stress. plz help. Link to comment Share on other sites More sharing options...
Pandora Posted January 31, 2007 Share Posted January 31, 2007 \You usually don't HAVE to edit the handling, carcols and the .ide lines. It just makes the car feel better. You could try to use Sami, but then just don't blindly install mods. Link to comment Share on other sites More sharing options...
Jared Posted February 2, 2007 Share Posted February 2, 2007 Moved to GTA San Andreas -> Modding. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now