Scott. Posted December 26, 2008 Share Posted December 26, 2008 (edited) So, I have bought this router. It connects to the computer, ADSL port where the internet comes out of etc. But it is having problems connecting to the internet. In the instructions, it says that the computer has to wire up to the wireless router first, then I can install wireless adapters etc. I have done all this, adsl cables, networking cables etc. But it still won't connect to the internet, It tells me the ISP is not accepting my settings, is there anyway I can fix it by myself without having to ring up the infuriating Orange? I don't have a firewall on the computer because it is still SP1. Any ideas? Edited December 26, 2008 by Scott. Link to comment Share on other sites More sharing options...
NSanityHD Posted December 26, 2008 Share Posted December 26, 2008 Scott, your most better to upgrade to TalkTalk, and get a new SP, like SP2 or something. Go in your Routers Admin interface (type your Routers IP) then your password and look at the settings for Wireless. If you have a NETGEAR DG834 Router then follow these steps: In the Setup category go to "Wireless Settings" you should see a page of settings. Name (SSID): Your NETWORK name (Ex: NETGEAR) Region: Europe (or what ever yours is) Channel: 06 Mode: g & b Wireless Access Point Enable Wireless Access Point: Yes (tick) Allow Broadcast of Name (SSID) Yes (tick) Wireless Isolation - Leave UN-ticked. If selected then unselect this Security Options Disable <-- Tick this WEP (Wired Equivalent Privacy) WPA-PSK (Wi-Fi Protected Access Pre-Shared Key) WPA-802.1x Click Apply. If you need any more help just re-post or PM me. -Ice Link to comment Share on other sites More sharing options...
Damjan Posted December 26, 2008 Share Posted December 26, 2008 He has a D-Link one. Link to comment Share on other sites More sharing options...
Scott. Posted December 26, 2008 Author Share Posted December 26, 2008 Nah, I got a Belkin one now. Cheers Kel, Will go and try it out now. I am using my other computer to wire up because the one with the internet doesn't have networking ports (lol.) Link to comment Share on other sites More sharing options...
NSanityHD Posted December 26, 2008 Share Posted December 26, 2008 Nah, I got a Belkin one now. Cheers Kel, Will go and try it out now. I am using my other computer to wire up because the one with the internet doesn't have networking ports (lol.) No problem dude! Link to comment Share on other sites More sharing options...
Scott. Posted December 26, 2008 Author Share Posted December 26, 2008 Right, atm I am sitting in my hall on my room computer which I am attempting to connect to a wireless router, again, it isn't going very good, It is all wired up, and the setup disc is now telling me that it cannot pick up a connection.. ffs. Link to comment Share on other sites More sharing options...
NSanityHD Posted December 26, 2008 Share Posted December 26, 2008 That'd be a problem with either your setup configurations or your Routers Signal Adapter. Make sure you have put in your Wireless PCI Adapters in correct. Make sure you screw your Wireless card into your PC under the Dial-up socket. Unfortunately I cannot help anymore on MSN because I can't signin on any Messenger software. P.S: I have TeamViewer though. Link to comment Share on other sites More sharing options...
Scott. Posted December 26, 2008 Author Share Posted December 26, 2008 I think it is a problem with my ISP so I am going to try it at my uncles tomorrow as he is on a different ISP to me to see if it will work, if it does then Orange is the problem. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now