Noru Posted February 6, 2007 Share Posted February 6, 2007 Well with the firmware 3.03 downgrader and the the new 3.03 OE-C firmware, anyone can use edison carters cheatdevice now. This topic is for anyone that has it and has some screenshots or short clips. Post them here. heres a couple I made using VCS and fireworks ... Link to comment Share on other sites More sharing options...
Spaz The Great Posted February 6, 2007 Share Posted February 6, 2007 Does 3.03 OE-C allow 1.5 homebrew to be played? I'm sort of progressing quickly in Pokemon Yellow and would like to continue my progress ^.^ Link to comment Share on other sites More sharing options...
Chris Posted February 6, 2007 Share Posted February 6, 2007 And is there not a 3.10 custom firmware now? Does that allow cheatdevice to run too? Link to comment Share on other sites More sharing options...
Ciaran Posted February 6, 2007 Share Posted February 6, 2007 Dark_Alex made his own 3.10 but it only adds some extra features, but he is now working on that firmware to try and get homebrew possible. Link to comment Share on other sites More sharing options...
Paul T. Posted February 6, 2007 Share Posted February 6, 2007 Well with the firmware 3.03 downgrader and the the new 3.03 OE-C firmware, anyone can use edison carters cheatdevice now. This topic is for anyone that has itand has some screenshots or short clips. Post them here. heres a couple I made using VCS and fireworks ... Can you please give me the codes for the lightsabre? unless you edit the gifs. Link to comment Share on other sites More sharing options...
Spaz The Great Posted February 6, 2007 Share Posted February 6, 2007 Dark_Alex made his own 3.10 but it only adds some extra features, but he is now working on that firmware to try and get homebrew possible. Ermm.... 3.03 OE-C allows homebrew. My only question is, how do I run the CheatDevice? Link to comment Share on other sites More sharing options...
Noru Posted February 6, 2007 Author Share Posted February 6, 2007 (edited) here is a guide from GTAF Running VCS Cheatdevice on Firmware 3.03 OE-CThis is a tutorial to help people run Cheatdevice on Firmware 3.03 OE-C! Step 1 Plug your PSP into your PC via USB cable. Then Go into the XMB (Home Menu) and navigate to "USB Connection" Step 2 Activate USB Mode, if everything is going right, it should look like this Step 3 Browse to your PSP directory on your PC. It should look something like this Step 4 Create a folder called "SEplugins" Step 5 Open up the newly created folder and put your .prx file in there (For this tutorial we are using vcscheatdevice.prx) It should look a little like the picture above Step 6 In the same folder, create a .txt document and call it "game.txt" Step 7 Open up your game.txt and put in this line ms0:/SEplugins/vcscheatdevice.prx Save changes and close. Disconnect your PSP from your PC Step 8 Turn off your PSP completley by holding the power switch up until it goes off. Then turn your PSP on again whilst holding the R trigger. Your PSP should enter recovery mode Step 9 Navigate to "Plugins" and press X. You should see two lines of text. The first should say "Back" and the second should say "vcscheatdevice.prx [GAME] (Disabled)" navigate to vcscheatdevice.prx and press X. it should now say "vcscheatdevice.prx [GAME] (Enabled)" Note: If you are having problems regarding the vcscheatdevice.prx not showing up, try naming the .txt document game instead of game.txt Step 10 Press back and navigate to "Advanced" press X and you should see 3 options. Navigate to "Advanced Configuration" and press X. You should see three lines of four lines of text. Ignore the last two and navigate to the one that says "Plain Modules in UMD/ISO (Currently: Disabled)" Press X and make sure it says "Plain Modules in UMD/ISO (Currently: Enabled)" Step 11 Press "Back" until you get to the Recovery Main menu. Navigate to "Exit" and press X. If you don't have a UMD in your PSP please proceed to Step 13 Step 12 If you have a UMD in your PSP, eject the UMD and wait for your PSP to reach the XMB (Home Menu) Step 13 Your PSP should reach the XMB (Home Menu) Insert VCS and fire it up. Congratulations! You are running Cheatdevice on Firmware 3.03 OE-C! Edited February 6, 2007 by Noru Link to comment Share on other sites More sharing options...
Spaz The Great Posted February 7, 2007 Share Posted February 7, 2007 Well doesn't that sound hard as hell..... I'll try it anyways, though........ Link to comment Share on other sites More sharing options...
GiiBz Posted February 11, 2007 Share Posted February 11, 2007 Well with the firmware 3.03 downgrader and the the new 3.03 OE-C firmware, anyone can use edison carters cheatdevice now. This topic is for anyone that has itand has some screenshots or short clips. Post them here. heres a couple I made using VCS and fireworks ... Can you please give me the codes for the lightsabre? unless you edit the gifs. He said he edited using firework (like paint) you plank Link to comment Share on other sites More sharing options...
K9 Krew Posted February 11, 2007 Share Posted February 11, 2007 hey noru those lightsavers look awesome Link to comment Share on other sites More sharing options...
Putt Posted March 10, 2007 Share Posted March 10, 2007 The lightsaber was freakin cool Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now